Our bare fiber holder is a cleverly designed fiber clamp that is used to hold 250 μm bare fibers without damaging the fiber. It in turn plugs into the 818-FA2 Bare Fiber Holder Mount which allows one to attach the assembly to the front end of the detector housing.
| Compare | Model | Drawings, CAD & Specs | Availability | Price | |||
|---|---|---|---|---|---|---|---|
|
818-FA2 Bare Fiber Adapter Mount, 818 & 918D Series Sensors |
|
$107 |
|
|||
|
FP3-FH1 Bare Fiber Holder, 818-FA2 Fiber Adapter Mount |
|
$377 |
|
|||
|
CA120 Bare Fiber Adapter Mount, For FMH Series and OMH-6790B | $290 |
|
||||
|
BF820 Bare Fiber Holder, CA120 or AO120 / AO122 Fiber Adapter Mount | $475 |
|
||||
|
CA250 Bare Ferrule Adapter, For FMH Series and OMH-6790B | $315 |
|
The FP3-FH1 Bare Fiber Holder is a cleverly designed fiber clamp that is used to hold 250 µm bare fibers without damaging it. It directly plugs into the 918D-IS series integrating sphere-based detectors. Combined with an 818-FA2 Adapter Mount, it can also be used for any 918D and 818 series photodiode power sensors.
The BF-820 Bare Fiber Holder is compatible with both ILX Lightwave® and Agilent adapter rings and is designed to hold and position a common telecom fiber. Inside the BF-820, opposing V-guides facilitate correct fiber positioning. Outside, textured finger grips enable single-handed maneuvering of the fiber holder into the meter. It requires CA120 for FMH series fiber optic sensors or AO120 for OMH series power and wavelength measurement heads.
Ultra-High Velocity Learn More
